Chapter 1 · Lesson 1.2
Directive 2006/42/EC and Regulation (EU) 2023/1230
The placing of machinery on the market in the European Union is governed by the “Machinery” Directive 2006/42/EC. It is replaced by Regulation (EU) 2023/1230, which applies from 20 January 2027.
What does not change
- The manufacturer must meet essential health and safety requirements (EHSR), assess the risks, compile a technical file, draw up a declaration of conformity and affix the CE marking.
- Harmonised standards give a presumption of conformity with the requirements they cover.
- Risk assessment remains at the heart of the approach.
What changes with the Regulation
| Subject | What is new (summary) |
|---|---|
| Legal form | A regulation, directly applicable in all Member States, without transposition |
| High-risk machinery | An annex lists the categories of machinery for which the involvement of a notified body is mandatory or possible depending on the case |
| Software and artificial intelligence | Software that performs safety functions and systems with evolving behaviour are taken into account |
| Cybersecurity | A requirement of protection against corruption: a malicious connection or modification must not put the machine in a dangerous situation |
| Substantial modification | A definition: whoever substantially modifies a machine becomes its manufacturer for the modified part (chapter 5) |
| Documentation | The instructions may be supplied in digital form, with a paper copy on request |
| Autonomous mobile machines, human-machine collaboration | Adapted requirements |
The Regulation was published in the Official Journal of the Union on 29 June 2023; it applies, for the most part, from 20 January 2027, the Directive remaining applicable until then. A few provisions have their own timetable: for a decision, read the article of the Regulation on its entry into force and application.
A machine placed on the market from 20 January 2027 falls under the Regulation. A modernisation project that ends in 2027 must therefore be thought through from now on with the requirements of the Regulation, in particular the cybersecurity of the control system and substantial modification.
- Directive 2006/42/EC gives way to Regulation (EU) 2023/1230 from 20 January 2027.
- Major novelties: software and AI, protection against corruption, substantial modification, digital instructions.
Updated: October 2026. Source: Regulation (EU) 2023/1230 (Official Journal of the European Union).