Aurorisk FR

Chapter 1 · Lesson 1.1

Machines and their accidents

Machines injure through simple, well-known mechanisms: a moving part that crushes, cuts, drags in or ejects. Machinery safety consists of eliminating them at the design stage, then preventing access to the danger zones during dangerous movements.

Objectives of the chapter
  • Recognise the main accident mechanisms linked to machines
  • Place Directive 2006/42/EC and Regulation (EU) 2023/1230
  • Distinguish the obligations of the manufacturer, the integrator and the user
  • Know how to find the standard that applies to a machine

Accident mechanisms

MechanismExample
CrushingA hand between the punch and the die of a press
Shearing, cuttingA finger on the blade of a shear
Drawing-in, entanglementA sleeve caught by a rotating shaft or a roller
ImpactAn operator struck by a robot arm or a moving table
EjectionA part or a tool chip thrown out
Other hazardsElectrical, thermal, noise, vibration, radiation, substances, postures

Serious accidents often occur outside normal production: setting, cleaning, troubleshooting, maintenance, when someone works inside the machine, sometimes by defeating a guard to “save time”.

The running case: a modernised press brake

A metal fabrication workshop (fictitious) operates an old hydraulic press brake. It has it modernised by an integrator: new numerical control, a light curtain at the front, an interlocked guard at the rear, a revised emergency stop. The course follows this project: risk assessment, measures, safety functions, conformity of the modification, acceptance and life of the machine.

Principle view of the press brake of the caseSimplified front view: the upper ram carries the punch and moves down towards the die fixed on the table; the operator is at the front, a light curtain protects the front zone, an interlocked guard closes the rear zone of the back gauges. Moving ram (downstroke) punch Table and die lightcurtain rear zone(back gauges)interlockedguard operator
Principle diagram, not to scale. On a real press brake, the type C standard also provides devices specific to these machines, for example a laser protection near the punch.

All the values of the case are example assumptions, reused in the chapters, the exercises and the quizzes.

Key takeaway
  • Crushing, shearing, drawing-in, impact and ejection are the main mechanisms.
  • Serious accidents often occur during setting, cleaning and maintenance.