Chapter 1 · Lesson 1.2
The standards: IEC 61508, IEC 61511 and their sector derivatives
Two standards structure the field. IEC 61508 is the basic, generic standard, written for all sectors. IEC 61511 applies it to the process industry and is aimed mainly at users and integrators.
| IEC 61508 | IEC 61511 | |
|---|---|---|
| Role | Basic standard for the functional safety of electrical, electronic and programmable electronic systems | Sector standard for safety instrumented systems in the process industry |
| For whom | Mainly manufacturers of components and PLCs, and sectors without their own standard | Operators, design offices and integrators who design and operate a SIS |
| What it covers | The whole lifecycle, hardware and software design, calculation methods (part 6) | The SIS lifecycle at the user’s site, the use of already certified or proven components |
| Structure | Seven parts (general requirements, hardware, software, definitions, methods, guidelines, techniques) | Three parts (requirements, application guidance, SIL determination) |
| Editions | Editions change: check the current version before citing a standard. In November 2026: IEC 61508 edition 2 (2010), whose edition 3 is being published (parts expected between late 2026 and 2027); IEC 61511-1 edition 2 (2016) and its amendment 1 (2017), combined in a consolidated version in force. | |
The sector standards
Other sectors have their own standard derived from IEC 61508: rail, nuclear, automotive (ISO 26262), and machinery with IEC 62061. For machinery, ISO 13849-1 offers another approach, based on performance levels (PL). These two machinery standards are covered in the machinery safety course, which refers back to this one for the common notions (failure rates, diagnostic coverage, common causes).
Who does what in the running case
- The manufacturer of the safety PLC and the transmitters develops and certifies its products according to IEC 61508: it provides failure rates, a systematic capability and a safety manual.
- The unit’s operator and its integrator apply IEC 61511: they determine the required SIL, then specify, design, verify, validate and operate the drum SIF.
In France, for installations subject to a hazard study, instrumented risk-control measures must demonstrate their effectiveness, kinetics, testability and maintenance. Functional safety standards are the recognised means of doing so; INERIS’s Omega 10 method (evaluation of the performance of technical safety barriers, report DRA-17-164432-10199B, 2018) gives its practical translation: effectiveness, response time, confidence level. The industrial safety course details this link with the hazard study (French-language course Étude de dangers).
- IEC 61508: basic standard, mainly for manufacturers; IEC 61511: process industry standard, for users and integrators.
- Machinery has its own standards: IEC 62061 and ISO 13849-1.
- The standards are the recognised means of demonstrating the performance of an instrumented barrier.