Chapter 1 · Lesson 1.3
Anatomy of an industrial system
To secure a system, you need to know what it is made of and how its elements communicate. The most widely used representation is a stack of levels, derived from the Purdue model.
The equipment
- Sensors and actuators: they measure (temperature, pressure, level) and act (valves, motors).
- Programmable logic controller (PLC): runs the control program in a fast loop.
- HMI (human-machine interface): a screen where the operator sees the state and sends setpoints.
- SCADA: supervision of an entire installation, often spread over several sites.
- DCS (distributed control system): widespread in continuous processes (chemicals, energy).
- Safety instrumented system (SIS): puts the installation in a safe state when a hazardous state is detected; it is separate from normal control.
- Historian: a database that archives measurements.
The level model
The lower you go, the greater the real-time constraint and the physical risk; the higher you go, the closer you get to business IT and the Internet. The exchanges between levels are the places to control first.
Key takeaway
An industrial system is a stack of levels, from the process up to the enterprise. Security starts with knowing what sits at each level and what talks to what. The IEC 62443 series takes up this breakdown as a functional reference model.