Chapter 1 · Lesson 1.3
The approach: a funnel in seven steps
We start broad and simple, then go deeper only where the risk requires it. The standard numbers seven steps, ZCR 1 to ZCR 7 (zone and conduit requirements).
| Step | Question | Deliverable |
|---|---|---|
| ZCR 1 · System | What do we protect, where do you get in? | Inventory, architecture, access points |
| ZCR 2 · Initial risk | What is the worst outcome? | Worst consequences, without likelihood |
| ZCR 3 · Zones and conduits | Who shares the same needs? | Zone and conduit diagram |
| ZCR 4 · Comparison | Is the worst case tolerable? | Zones to examine further |
| ZCR 5 · Detailed assessment | What real risk, which measures? | Residual risk, SL-T |
| ZCR 6 · Requirements | What must be required, from whom? | Requirements specification |
| ZCR 7 · Approval | Does management accept? | Approved results |
Three decisions
- Is the system properly delimited? (ZCR 1)
- Which zones exceed the tolerable? Worst consequences, split, comparison (ZCR 2 to 4): a quick sort that decides where to concentrate the effort.
- For each zone retained, are the measures enough? ZCR 5 loop: risk without measures, existing measures, measures to add, residual risk and SL-T, until a tolerable risk is reached.
Result
For each zone and conduit: an SL-T, countermeasures, a residual risk, and in the end the cybersecurity requirements specification, which the owner approves.
Who is around the table
Owner (operations manager), automation engineer, dependability, IT, representative of the manufacturer or the integrator.
Numbering of the IEC 62443-3-2:2020 edition; always specify the edition cited.